| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Anyone have Bocote binding? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=10060 |
Page 1 of 1 |
| Author: | af_one [ Thu Dec 28, 2006 2:52 pm ] |
| Post subject: | |
I'm building a pair of Bocote OM's and would like to bind them in Bocote as well, maybe with an ebony lam? If any vendors here have some or can make somthing up, please pm me. |
|
| Author: | af_one [ Fri Dec 29, 2006 2:24 am ] |
| Post subject: | |
Todd, Not sure if your interested in any, but I sent out a few emails to our vendors asking for some. I can let you know what I find out. |
|
| Author: | Colin S [ Fri Dec 29, 2006 3:25 am ] |
| Post subject: | |
Is there enough material on the sides to cut some binding? It's how I get most of mine, you only need about 18mm extra width on the sides and you can get two strips off each. That way you can also (if careful) line the figure up. Of course if you've already bent the sides then this isn't an option. Colin |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|